CAMERA and OTHER ACCESSORIES for iCAMView

Standard Specification for all USB Cameras listed:

• VIMICRO ZC0301 Plus processor inside.
• Color CMOS VGA sensor with 350,000 pixels.
• Picture Format: 160x120, 176x144, 320x240, 352x288, 640x480, 1024x768 (CM-03a) & 1280x1024 (future upgrade)
• MJPEG compression.
• Up to 30fps@CIF (352x288), 10-15fps @ VGA (640x480)
• USB Interface, reverse compliant with USB 1.1 specifications.
• Focus Distance: 5cm to infinity, manually adjustable Focus Lens.
• Minimum illumination: 2.5 lux @f1.4
• Visual angle: 51/60 degree horizontal.
• Auto Control for White balance, Exposure, Color/Brightness.
• Operating Temperature: 0°C to +40°C.
• Powered by USB 5.0V

Infra-Red Bullet Camera

(Model No. IP-09)

• 8 Infra-Red LED for night vision with effective range of 10.0 Meter
• Adjustable camera stand with wall mount.
• 7 meters USB Cable
• Dimension: 62 (W) x 51 (H) x 130 (L)
• Net Weight: 650g

USB SpeedDome Camera

(Model No.: CM-08)

• Protective clear DOME casing
• Pan: 350°, speed @ 90°/sec.; Tilt: 90°, speed @ 90°/sec.
• Suitable for ceiling or wall mount
• Dimensions: 115 (D) x 125 (H)
• Weight: 450g

Pan-Tilt USB PC Camera

(Model No. CM-03)

CM-03 features a new modern and a more aesthetically appealing outlook.  It is also fitted with a more advanced motor which allows for a smoother Pan & Tilt function.

• USB Controlled Pan/Tilt, RS232 port not required.
• USB cable length: 1.5 meters
• Pan: 320°, Tilt: 60°
• Dimension: 120 (W) x 115 (H) x 110 (D)
• Net Weight: 450g

Pan-Tilt USB Camera (Model No.: CM-03a)  Plus version

CM-03a features ability to;

• set different patrol mode, oscillating, square, pan only, tilt only.
• jump to preset locations.

Pan-Tilt  USB PC Camera

(Model No. CM-02)

• USB Controlled Pan/Tilt, RS232 port not required.
• USB cable length: 1.5 meters
• Pan: 320°, Tilt: 60°
• Dimension: 110 (W) x 112 (H) x 106 (D)
• Net Weight: 450g

USB MiniGuard Camera

(Model No.: CM-04)

• Protective aluminum casing with lens cap
• Outdoor use under awnings.
• Adjustable camera stand with wall mount
• Dimension: 35 (W) x 35 (H) x 120 (L)
• Net Weight: 250g

USB Multi-InfraRed Camera

(Model No.: CM-07)

• Fixed CMOS camera
• 18 LED to assist in night vision
• Protective DOME casing, Outdoor use under awnings.
• Suitable for ceiling mount
• Dimension: 110 (D) x 90 (H)
• Weight: 250g

USB PuppyCam

(Model No.: CM-11)

• Suitable for baby room or as decoration
• Dimension: 65 (W) x 50 (H) x 60 (L)
• Weight: 100g

Infra-Red USB PC Camera

(Model No. CM-01)

This Infra Red USB camera has an effective IR distance up to 2.0 meters.   The clipper allow it to be attached to any protruding object and it's adjustable neck allow it to be rotated to any direction.

Specification:

• Infra Red LED for night vision, effective range: 2.0 Meter
• Anti-slip clip on with adjustable neck.
• Dimension: 35 (W) x 75 (H) x 57 (D)
• Net Weight: 150g

SnakeEye USB PC Camera

(Model No. CM-05b)

The SnakeEye USB camera is one of the latest addition to the list of available camera.  Flexible slim and striking, it can be fashioned to view odd angles.

Specification

• Dimension: 20 (W) x 50 (H) x 20 (D)
• USB length: 430 (H) from neck to USB plug
• Net Weight: 150g

• iCAMView built-into form factor
• Additional mini USB port for second camera.
• Approximately 350g

IP Bullet Camera (Model No.: IP-09)

• iCAMView built-into form factor
• Additional USB port for second camera.
• Approximate weight: 750g

IP SpeedDome Camera (OEM only)

• iCAMView server built-into form factor
• Approximate weight: 650g

The PoE adaptor allows regular Ethernet cable to transmit power.  This reduce the amount of cable required and eliminate messy cabling issues.  The unit works in a pair, with an Injector and a Splitter.

The injector is required to combine both power and data to run on standard CAT5e ethernet cable.  Once it has reached it's destination, these data and power must either go to a PoE enabled device, but if such feature is not already built-in, then a Splitter is required to separate the power and data.

HomePlug uses the power line to carry data.  Like PoE, it needs a mount and dismount module.

This device allows iCAMView to connect wirelessly to the wireless Router.  The unit can function either as a wireless ethernet adaptor or an Access Point.

This device allows the user to extend the USB cable length by using standard CAT5e cable.  However, user must be weiry voltage drop over longer distance.

NOTICE:

The compatibility list is currently being updates and revised. Please check back for the latest updates.

Note:

- The following is a list of Manufacturer & Models with compatible processor and sensor. 

- This list is only applicable to iCAMView hardware HCV73, HCV74, HCV91 and above.

- This list is NOT supported for other models.

ViMicro

---

0xac8

0x301

0x301b

0x303b

0x302

0x305b

7131R,7131B

MI360

PB033X (on v2.54 & above)

TAS5130 (on v2.54 & above)

OV,HDC,PAS sensors not supported.

ViMicro

---

0xac8

0x0323

MI1320

VideoCamV2

VideoCamV3

VideoCam Web

0x458

0x7007

0x700c

0x700f

TAS5130

TAS5130

TAS5130

0x8050

0x804e

0x0128

TAS5130

TAS5130

TAS5130

0xd003

0xd004

0xc005

TAS5130

TAS5130

TAS5130

WUG2670

A9T Laptop Integrated

WL-2203B

WL-2203S

EW-7317UHg

WL-410U

WL-430U (zd1211 & zd1211b*)

HWU8DD

HWL2

LCS-8131G2

LCS-8131G3

WL5480USB-80

GW-US54GZ-WO

GW-US54Mini

SWMULZ-5400

XG76NA

TEW-424UB A

TEW-424UB B1

TEW-424UB C1

XN-3134G

ZyAIR G-220 v2 (zd1211 & zd1211b*)

ZyAIR G-220F

ZyAIR AG-225H